Rocket Mass Heated Bed, Portugal 2013

Life brought me back to Portugal once again. This time to co-facilitate a Natural Building Course with focus on Rocket Mass Heaters and Efficient Cooking Stoves. When I did my Permaculture Design Course two years ago at Permaship in Bulgaria, I met Josh from Sweden. We had sporadic contact throughout the last two years and our paths got a little closer when we both were in Central America last winter, but didn’t meet up in the end. Josh as been focusing on designing and building rocket stoves for heating and cooking and since I always wanted to build a rocket mass heater myself, I decided to invite him to Portugal to teach a workshop at the Terra Alta Permaculture Project.

Appropriate Technology = Community Empowerment

Firewood is scarce resource in Portugal and you want to use it as efficiently as possible to get the most of that stored sunlight into heating your house or cooking your food. Besides making good use of this energy, it is the appropriateness of this technology that allows us to be more independent from fossil fuels and to create energy alternatives on a local level of our communities and bioregions.

For myself, one of the most important arguments in favor of natural building or appropriate technologies are empowerment and autonomy. We have all the knowledge and tools to be in control of our lives and we don’t need external high-tech solutions to solve our problems. I like the challenge of going back to “traditional techniques and “pimp” them to make functions like cooking and heating more efficient, joyful and with a beautiful design, that adds to the character of a space.

Heating and Cooking in a Mediterranean Climate

Rita, Pedro and their two daughters live in the Sintra area, close to the coast of Portugal, where the Summers are rather hot and dry and the Winters cold and rainy. It never get’s below cero but the constant humidity and low temperatures during the winter months creep into your bones. One part of their house is made out of earthen materials, the other half is made of wood. In the earthen part of the house, which also has a little loft on top where the children play and sleep, they used to have a wood stove. The experience was that it radiated a lot of heat while the fire was going and even felt too hot in the upper part of the room, whereas the lower part stayed cold.

Cob is excellent for thermal inertia. To achieve a more stable temperature throughout the day and night, the family decided to take the regular stove out and replace it with a rocket mass heater. In this design, the combustion follows the principles of efficient wood burning stoves (see below and Aprovecho Research Center). Rocket Mass Heaters make use of the hot air gases by channeling it through pipes that are embedded in a bed or bench made of cob before leaving the house through the chimney. Cob has excellent thermal mass properties. It slowly takes on heat and releases it once the surrounding temperature is going down. The bed is basically a thermal mass battery that helps to achieve a constant temperature at a comfortable level. This resistance to drastic fluctuations in temperature is referred to as thermal inertia. The combustion chamber also allows for that immediate heat since the fire burns like a rocket and lot’s of energy is released right from the beginning.

The Heated Bed for Cold Winter Months

After getting details for the design and implementation ready, the participants arrived. Most of them already had some experience with Permaculture and Natural Building and it was a really great group to build and have fun with! Since the back of the house was built into the hillside, we elevated the bed so it didn’t have that “cavy” feeling. We built a stone wall to contain the bed and then filled it up with rocks and gravel until we achieved the desired height, which was about one meter. Lot’s of cob mixing followed and Pedro joined the party with his didgeridoo and the drums. Thanks Dina, Livia, Sophia, Inés, Drew, Joao, Samuel, Andy, Jayne, Angelica, Sergio and all the others that dropped in for parts of it, for their enthusiasm and eagerness to learn and put their hands in the mud! We built the combustion chamber and the elevated bed in pretty much two days of full-on work! This allowed us to take it easy the next day, when we built the 16-brick rocket stove for cooking.

Wood Burning principles.

So when we talk about rocket stoves, we actually talk about a set of principles designed for improving combustion efficiency and heat transfer efficiency. Since hotter fires burn more efficiently, the combustion chambers in rocket stoves are insulated and no mass is used around it. This highly increases the transfer of heat into the pot and not into the stove itself. For a fire to burn hot, it also needs good air draft, what you improve by a small opening in the feed tube, a shelf or grate under the fire. For optimal heat transfer into the pot, you will need a “skirt” around to pot to force the hot gases to scrape the pot. Correct proportions are recommendable to maintain the cross sectional area throughout the stove for best efficiency. Following these principles you create extremely hot fires that roar and give them the “rocket” in their name.

Top sum it up: in Rocket Stoves for cooking it is all about efficient heat transfer from the fire into the pot. In Rocket Mass Heaters it is all about making good use of the hot air by tubing it through thermal mass that get’s heated up and later releases the warmth. Both designs follow the principles of efficient wood burning.

The course ended with a design exercise in pairs. The idea was that the course participants already got started with thinking about projects they want to implement in their home or on their land. It was great to see the creativity and different ideas and their enthusiasm, and it was also good feedback for Josh and myself.

Co-creation and Community

Ever since I have started my Permaculture and Natural Building journey,  I loved the community aspect of it. That’s what drives me. Also because I like clay and I like doing things myself. But mainly because of people. I don’t like building by myself and I rarely do that. And so it is with teaching and facilitating courses, work-parties or working with volunteers. I do believe that working in a team is enriching for both facilitators and participants.

In the last months I have started to facilitate short workshops and courses, assist the lead teacher and shared the leadership role with other people. What I have enjoyed the most was teaching with a small group of people that have a similar level of experience. Besides working with Josh, I had another enriching experience during the Village Building Convergence in Portland, Oregon, where I co-facilitated a place-making site together with two other woman natural builders. There is no hierarchy and no boss, but a lot of exchange, confidence in one another and mutual support!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s